Fallout 4 won't load saves. Adjusting the details of objects at a distance

An alternative ending to the game, all factions are alive (except for the Institute) and are not hostile to each other.

There are 3 stages in this save file, the first save is at the exit from shelter 111 (it is possible to change the character's parameters), one intermediate save at the institute (it is possible to change the course of the plot), and the last save is the destruction of the institute, the main plot of the game is completed, an alternative one is achieved final game.

The main character is a woman, with my face preset based on the main one offered by the game by default.

The DLCs have not been completed, all the companions are in the team (except for the DLC), Curie has been turned into a human.

An alternative ending to the game, all factions are alive (except for the Institute) and are not hostile to each other, achieved according to this scenario:

1. By the time you complete the “Reunion” story quest, you must complete all possible Lord of Steel tasks available at that time at the Cambridge police station. At the same time, do repeating tasks also to find an artifact and kill ghouls (once each), complete Dans’ quest to find a reconnaissance group, talk to the only surviving Paladin Brandis in the bunker, report again to Dans.

2. Only after this do you complete the story mission “Reunion” and move on to the next part “Dangerous Thoughts”.

Important: The teleport to the Institute must be built with the Minutemen. The tasks for the Underground “Agent Work” and for the Brotherhood of Steel “Shadow of Steel” must not be completed yet. The institute (after you have been there) should hate you and have hostility. If you have a strong desire, you can wander around inside, even completing the last task of the main plot (to find your son) “Closed Institution”. But then, fortunately the game allows you, kill someone and run away from there.

Please note: After the “Closed Institution”, do not communicate with the Father. It’s better to give the entry for the “Detention” quest to Sturgers (the same person among the Minutemen who helps the Hero get comfortable with building settlements).

3. After the Institute, you can complete the tasks of the Brotherhood of Steel until the moment in the quest “No Mercy”, when you need to get into a vertibed (helicopter). So don’t sit down, but at the same time take all possible additional tasks from the Brotherhood of Steel and don’t do it.

4. Also complete the Minutemen missions “Defense the Castle” and “Choice of the Minutemen” and start “Critical Mass”, but again do not finish.

5. Let's move on to the Underground. Now we begin “Agent Work” and complete all its quests up to “Randolph Station”.

6. Now complete “Critical Mass/The Nuclear Option”
At the same time, the institute disappears in the flames of the explosion of its own reactor.

Completion

After this, multiple Underground quests await you, but do not communicate with PAM, otherwise she will want a war with the Brotherhood of Steel. The Brotherhood itself will praise the Hero (except for the head of the Brotherhood Maxson himself) and in the future their quests will usually be repetitive to kill super mutants and raiders. In general, the Hero is loved and respected and all factions are ready to give him a variety of assignments, so you won’t be bored.

Installation

Unzip the archive using any archiver and place this folder along the path, usually in “My Documents / My Games / Fallout4 / Save”, respectively. "C:\Users\Username\Documents\My Games\Fallout4\Saving"

Primary source of information in English:

Game saves

In this category we collect a variety of game saves that users send us and which we manage to find in the public domain. If you can’t get past some point or simply lost your saves, you can always use our archive, download the game save file and start playing. Of course, we always credit the authors of files whenever possible.

Optimization problems in modern games are the norm. And not because sometimes you come across lazy developers, bad testers or greedy publishers. The fact is that graphic components and technical capabilities have moved far forward. Therefore, it is not surprising that problems arise when entering the game or it is thrown to the desktop, or even freezes during the game.

2 - Another useful tip: turn off your and (if, of course, any of this works). This advice was written for the reason that this advice helps some during the launch of Steam.

3 - If all else fails, then try running the game in windowed mode, having previously set the settings before starting the game.

4 - If nothing helps you at all, then we recommend restarting your hardware. After that, install a new one and install earlier drivers - that is, for September and October. After these shenanigans, launch the game, but with reduced settings and windowed mode.

Crashes while loading in Fallout 4

1 - So far there is only one piece of advice in this case. So, first, make sure that you don't have, and. If something is on, turn it off. In any case, you will still need to verify the game cache and only after that, try to launch it again.

Fallout 4 crashes on AMD video card

1 - Again, there is only one piece of advice in this case. To overcome this problem, you will have to roll back to an earlier version of full-fledged drivers and make sure that you have verified the files that are associated with the Steam service.

Boosting Fallout 4 frame rates on an Nvidia graphics card

1 - First, you need to install the latest drivers on your hardware. After installation, you must also disable . After that, launch the game.

Fixing the rooted mouse bug in Fallout 4

Let's open the file that is in the folder with the game. Next, we find the value and set the value. Now we go on a search, where we put the value. Save, go into the game and check!

Fallout 4 freezes

1 - First of all, make sure that the configuration of your PC matches what was specified by the developers. You can make sure here.

2 - If you are a noble owner of a pirated version, then it’s all about the pirated version, wait for updates and patches.

3 - If you are the noble owner of a licensed version on Steam, then first it’s time to verify the game files, install the latest drivers, reboot, of course, your hardware and make a new installation of the game. And be careful, because you will have to make sure that Steam will download the rest of the files for the game.

Removing the frame rate limit in Fallout 4

Sometimes it happens. If you really have a frame rate limitation with V-Sync, then start in windowed mode first. Next, open a file called “Fallout4Prefs.ini” in the game folder. Find the line “iPresentInterval” there and change the value to “1”. Now go into the game and check.

Fallout 4 disc writing error appears

1 - Make sure you have enough space on your hard drive to play the game.

How to run Fallout 4 in custom resolution?

So, you need to set the following values: , .

After this, you will have to do the same actions in the 2nd file “Fallout4Prefs.ini”, which is already located in the folder with Steam

How to improve performance and graphics in Fallout 4

Before you move on to setting up graphics in , you will first have to go to the following address: . Now find the file and make a backup copy of it. After that, it's time to open the original using notepad. Attention: now you will simply indicate the value of the characteristics in order to change them in the game. Please be aware that once you change the settings in this file, the file will be overwritten and all manual settings will be abruptly lost.

Setting character visibility

This option will be responsible for the distance at which you will see characters, monsters, animals and other creatures. Depending on what hardware you have, the settings may be either minor or medium. In this option, the value rolls from 0 to 15. 15 is ultra quality from ultra quality. The input must be made after the icon. The required line is called. Take action.

Setting effects on characters

This option is so insignificant that you can set it to ultra quality and then not even worry. This option will not affect the performance of your game in any way. Here's an example:

1 - uMaxDecals= [Ultra settings - 1000]

2 - uMaxSkinDecals= [Ultra settings - 100]

3 - uMaxSkinDecalsPerActor= [Ultra settings - 40]

Adjusting the details of objects at a distance

In this option, the higher the value, the further details will be drawn on the models. Plus, this option will have a huge impact on your game's performance. In some places it can even take up to 50% of the frequency. So be extremely careful with this option. In addition, this setting also includes a couple of characteristics. You'll have to experiment a little to find out what exactly is suitable for your hardware:

1 - fTreeLoadDistance= [Ultra settings - 75000.0000]

2 - fBlockMaximumDistance= [Ultra settings - 250000.0000]

3 - fBlockLevel2Distance= [Ultra settings - 110000.0000]

4 - fBlockLevel1Distance= [Ultra settings - 90000.0000]

5 - fBlockLevel0Distance= [Ultra settings - 60000.0000]

Setting up lighting effects

This effect affects the light that passes through a dense medium, thereby creating an analogue of light columns:

1 - GR On/Off

2 - GR Quality 0/1/2/3

3 - GR Scale [digit]

4 - GR Fog 0/1

5 - GR Fog color r/g/b

6 - GR Info

7 - GR 64 [here it is better to leave either 64 or 128, but note that this option reduces the frame rate]

Setting the grass distance

In this option, you can either lower the amount of grass or increase it. If you are going to lower, start from the highest value. The maximum value is 14,000 points. Here are the options:

1 - fGrassStartFadeDistance= [Ultra settings - 7000, Mega ultra settings - 14000]

2 - fGrassMaxStartFadeDistance= [Ultra settings - 7000, Mega ultra settings - 14000]

Setting the distance of things

This option does not affect performance that much, so I recommend setting it to maximum. The option looks like this:

1 - fLODFadeOutMultItems= [Ultra settings - 15]

Setting object distance

This option applies to almost everything in the game. So lowering this option improves performance, and increasing productivity improves quality. If you want to make the picture much richer and richer, feel free to increase it. The option that does this is:

1 - fLODFadeOutMultObjects= [Ultra settings - 15]

Setting up particles

This option is responsible for a variety of explosions, smoke, lights and much more in this spirit. If you hope that by checking this option the picture will look beautiful, you are deeply mistaken. But by lowering it, performance will increase:

1 - iMaxDesired= [Ultra settings - 750]

Setting shadow distance

This option is responsible for the maximum distance at which shadows will be displayed in the game. If you are not the happy owner of top-end hardware, then it is better to set the value to 17000. In any case, here are the options, experiment:

1 - fShadowDistance= [Ultra settings - 20000.0000]

2 - fDirShadowDistance= [Ultra settings - 20000.0000]

Setting shadow quality

1 - iShadowMapResolution=

Water setting

As you may have already noticed, the water is not very beautiful. For this, you can make sure that it does not reduce the frame rate. To do this, set the settings from to. Don't be afraid, and feel free to set all values ​​to. The options look like this:

1 - bUseWaterDisplacements=

2 - bUseWaterRefractions=

3 - bUseWaterReflections=

Most games from Bethesda are developed on the same engine and work on the same principle. Because of this, an avid fan of their games knows where the saves are, how to install mods, and so on. This article tells you where the saves are in Fallout 4 and what you can do with them.

Description

Since this game is created on the Skyrim engine, you may find saves in the same directory as for the mentioned game. This suggests that the file structure and directories of these two projects are not very different from each other.

This situation leads to the fact that any user, using these instructions, can easily change the files in a certain folder to third-party ones and get the desired progress in completing the game. By replacing the save in Fallout 4, you can easily get what you couldn’t achieve on your own due to high difficulty or lack of time for personal completion.

This way you can install other people’s saves and check what content awaits you at a particular level, find out which quests should be completed differently, and so on.

Where are the files you are looking for? First, you need to open the standard documents folder, which is created by the Windows operating system itself. It can be accessed through a system shortcut, and can also be found in the system partition of the hard drive in the Users/"Username" folder.

In the documents folder you should find the My Games directory and go into it. It contains a folder with the name of the game, and in it there is another directory called Saves. Inside the folder you will see several files. Among them are the saves themselves. Each file is responsible for a separate slot. Make backup copies before deleting them.

The Fallout 4 folder also contains configuration files in ini format. In them you can manually change game parameters, graphics settings, and so on. Use this opportunity to set non-standard values ​​if necessary.